HEIKE FALK – Hausmeisterservice & facility services to connect lamps, and requires no great skill of the craftsman. However, care and the exact observance of individual work steps are needed, informed that the Hanau janitor service Heike Falk because of dealing with power cables. The connection between wall or ceiling lines with the electricity of a lamp is made by screw terminals. These are not available, in the scope of delivery of the lighting system can be purchased for this purpose provided Terminal, for example, in a hardware store. Bobby Sharma Bluestone addresses the importance of the matter here. It is to refrain from, use terminals that are not intended for this work. The lamp Assembly begins with the application of the used terminals at the ends of the lamp cables. For this purpose, their screws and pushed the cables through the hole in the metallic middle section of the Terminal, until their bare ends completely disappeared in the Terminal. Electricity can be very dangerous.

It is essential to ensure that no voltage to the wall and Ceiling lines located before the next work step is started, to connect them with the lamp. For the proper and safe function of the lighting system, it is important to connect the matching conductor. The House has electricity of recent, the protective earth conductor is yellow-green, while the so-called neutral wire is light blue. The phase is a brown or black color. In contrast, protective conductor in old Stromleitungssystmen are red, neutral grey and black phase.

Power line and lamp are connected by their respective related lines inserted in the opposite ends of the Terminal and she fastened by means of screws. In some lights, the protective earth conductor is attached to a contact marked with the Earth symbol on the lamp housing. The power cord of the lamp are already screwed, ex-works in a pinch its role mostly about symbols is illustrated. “Earth received an Earth symbol, neutral 0″or”N”. The phase is using a P”or L1″ shines through made. To ensure that no any serious errors at the connection of the lamp were made, a metallic part of the activated lighting system with a phase Tester is to touch. Was the installation is carried out correctly, the lamp remains dark. Ambiguities or doubts occur in the lamp Assembly, a skilled person should be entrusted with her, to make sure that no problems occur. The Hanau Heike Falk janitor service in this regard supports its customers happy to competently to the page.